Home › Forums › General Discussion › Small fire at 1 RQ [and Sky reception]
- This topic is empty.
-
AuthorPosts
-
-
April 14, 2018 at 9:31 pm #616
imported_post
ModeratorAccording to fire personnel present (in full force, with four fire engines which, apparently, is standard procedure), a small fire broke out earlier this evening in the water boiler cabinet of a top floor flat at 1 RQ. Fortunately, nobody was hurt in the incident, and the fire, which developed “a lot of smoke”, has now been put out.
As an aside obviously, we lost our Sky connection shortly after the arrival of the fire services, who say they temporarily switched off the power supply to the flat in question. Given that our Sky dish sits on top of 1 RQ and that other Sky users in our stairwell are affected too, I cannot help but think there may be a connection.
Tom
10, 2 RQ -
April 15, 2018 at 1:21 am #1561
imported_post
ModeratorDespite several reboots etc. of our Sky box, the signal remains off following the power cut earlier this evening at 1 RQ due to the fire. As Sky plainly are not interested in (or responsible for) communal dishes, like ours, can someone, perhaps at Residents' Company level, please bring their influence(s) to bear in the right places to get the signal back up and running, preferably in time for the Chinese F1 GP starting at 7.10 a.m.?
Thank you 🙂
Tom
10, 2 RQ -
April 15, 2018 at 10:16 am #1562
imported_post
ModeratorHi Tom
Thanks for posting this and making people aware it is a general issue. I'm at 98 Rope Street and we also have had no satellite or aerial signal since yesterday evening.
Have you reported this to Rynew yet?
Cheers
Paul
-
April 15, 2018 at 7:36 pm #1563
imported_post
ModeratorHi Paul and Tom
We have the same issue. I sent an email to Rynew today and will call them in the morning.
-
April 15, 2018 at 7:51 pm #1564
imported_post
ModeratorHello All,
I only just got back to RQ and found this out. I have restored power to the Sat. system and it should all be working now.
Thanks
Simon -
April 15, 2018 at 8:00 pm #1565
imported_post
ModeratorThanks Simon.
Yes it's all working again
Cheers
Paul
-
April 15, 2018 at 8:43 pm #1566
imported_post
ModeratorConfirmed from here as well, with thanks, Simon! 🙂
-
April 15, 2018 at 10:22 pm #1567
imported_post
ModeratorMine is working too. Thanks Simon
-
-
AuthorPosts
- You must be logged in to reply to this topic.